8PA Vacuum Heat Treatment Muffle Furnace for Industrial Laboratory

The 8PA Vacuum Heat Treatment Muffle Furnace is designed for industrial laboratory applications, featuring a high vacuum system for precision heating processes.

Primarily used for vacuum heating degassing of the coupler housing and suppression of air oxidation.

• Product Model: Non-standard Customization
• Operating Temperature: RT ~ 200°C
• Maximum Temperature: 200°C
• Furnace Cavity Dimensions: 900×1000×1600mm (W×H×D)
• Heating Element: Ceramic Fiber Heating Plate
• Controlled Atmosphere: 1 channel of nitrogen
• Temperature Control Accuracy: ±1°C
• Control Mode: Imported temperature controller with PID parameter auto-tuning
• Number of Temperature Control Points: 3 points (front, middle, and rear)
• Number of Temperature Measurement Points: 8 SMD thermocouples
• Vacuum Detection: Vacuum gauge tube and vacuum gauge for supporting detection
• Alarm and Protection: Over-temperature, broken thermocouple, vacuum pump overload, low pressure, under-reverse phase, etc. audio-visual alarm protection
• Design Power: ~12kW
• Power Supply: Three-phase five-wire, 380/220VAC, 50Hz
• Equipment Weight: ~1200Kg
• Overall Dimensions: 1690mm×1550mm×2290mm (W×H×D)

• Environmental Conditions: Temperature 0 - 40°C, humidity ≤ 80% RH, no corrosive gases, and no strong air flow disturbances
• Floor Requirements: Level, without obvious vibration, with a bearing capacity > 500 Kg/m²
• Power Conditions: Capacity greater than 24 kVA, three-phase five-wire system, voltage 220/380 V, frequency 50 Hz
• Installation Site: 2500 mm × 3000 mm × 3000 mm (W × H × D), with an installation area greater than 8 m²