Laboratory Industrial Bell Jar Heat Treat Furnace For Electronic Ceramic Components

2880*3600*2240mm D*H*W Temperature Bell Jar Furnace BF580-17 with Effective Chamber Dimensions 1200*600*800mm D*W*H

This equipment is specifically designed for high-temperature sintering processes of advanced ceramics, magnetic materials, electronic ceramic components, and similar products.

• Rated Temperature: 1700ºC
• Maximum Temperature: 1750ºC
• Effective Dimensions: 1200mm×600mm×800mm(D×W×H)
• Heating Method: U-shaped silicon molybdenum heater
• Thermocouple: Type B
• Temperature Control: 2 Points
• Temperature Set Accuracy: ±1ºC (flat temperature insulation)
• Temperature Control Mode: Control module imported from Japan with PID
• Heat-up Rate: ≤3ºC/min
• Temperature Uniformity: ±5ºC (empty furnace insulation test 2 hours under 1700ºC)
• Program Tracking Accuracy: ±2ºC (>600ºC)
• Furnace Surface Temperature: ≤40ºC
• Maximum Lifting Trip: 800mm
• Lifting Method: Screw driven lifting system
• Loading Weight: ≤3000kg (with firing furniture and products)
• Atmosphere Control: Two channels of air inlet, each controlled by glass rotor flowmeter (5-50L/min)
• Exhaust System: Two exhaust chimneys with automatic opening/closing covers
• Alarm System: Over-temperature, broken couple, overload, over-range, deviation alarms
• Maximum Heating Power: 120kW
• Empty Furnace Insulation Power: ≤60kW
• External Dimensions: 2880×3600×2240mm(D×W×H) (excluding tracks and control cabinets)
• Appearance Color: Light gray

• Environmental Conditions: Temperature: 0-40ºC, humidity ≤80%RH, no corrosive gas, no strong airflow disturbance
• Atmosphere Conditions: Dry, clean, oil-free compressed air (0.4-0.8MPa, 10-30 m³/h)
• Ventilation System: Non-contact access user exhaust system (>50 m³/h capacity)
• Ground Requirements: Horizontal, no vibration, load-bearing >1000 Kg/m²
• Power Requirements: >160kVA, 3-phase 5-line (220/380V, 50Hz)
• Installation Site: Minimum 6000×4000×4000mm(D×W×H), >24m² area